Tianfeng Iron and Steel Narrowband Rolling Mill
Release time:
2023-09-20
The oil-and-gas lubrication transformation of Tianfeng Iron and Steel narrow-belt rolling mill was contracted by Yantai Huashun Mechanical Engineering Equipment Co., Ltd. And was completed in March 2014. The second roller of finishing rolling and the second roller of rough rolling have been put into use (the fourth roller of finishing rolling is not in place because the support roller is not in place, it is not used) After on-site tracking, from July 15, 2014 to July 30, 2014, the second roller of finishing rolling supporting Yantai Huashun oil and gas automatic lubrication equipment, the use effect is as follows: After the transformation of oil and gas lubrication, the bearing consumption is significantly lower than dry oil, and the lubrication cost is reduced, the equipment failure rate is reduced, and the Water pollution, the on-site environment has been greatly improved, and the on-site use effect is good.
Compared with dry oil, within half a month, the cost savings of oil and gas lubrication will be 27,220 yuan. If all the two rollers of finishing rolling use oil and gas lubrication, the estimated annual cost savings will be 653,280 yuan.If all four rollers of finishing rolling use oil and gas automatic lubrication equipment, the estimated annual cost savings are (1111076-21280x2) x12=822192 yuan.
Previous Page
Next Page
National Advisory Hotline
Sales Hotline: 18953589385
Fax: 086-535-6890958
Email: wang@ythuashun.com
Address: No.1, Jingba Road, High-tech Zone, Yantai City, Shandong Province
Powered by: 300.cn SEO Tags