Built-in distributor
Classification:
Bearing Oil and Gas Lubrication System
Hotline:
Details
The built-in distributor needs to be specially designed for the bearing seat, used in combination, and supplied in complete sets.There are various specifications such asф15,ф25, etc. For the secondary distribution of oil and gas, the lubricant supplied to the bearing seat can quickly penetrate into each friction pair, so as to achieve the ideal lubrication effect.
Schematic diagram of the installation of the built-in distributor
The built-in distributor is built-in and installed in the bearing seat, which is specially developed and designed for the bearing seat structure using serial bearings.
A bearing seat only needs to be loaded into a set of built-in distributors, and the oil and gas flow into the bearing seat can be distributed into several tributaries in a specific proportion, which can achieve the same amount of oil and gas distribution, and also realize the proportional distribution of oil and gas.This distribution reflects the concept of fine lubrication of oil and gas lubrication-100% of the lubricant is used.
A set of built-in distributors only needs to be connected to an external oil and gas pipeline, and when changing the roller, you only need to unplug the oil and gas quick connector to change the roller.
Previous
Related recommendations
Message consultation
National Advisory Hotline
Sales Hotline: 18953589385
Fax: 086-535-6890958
Email: wang@ythuashun.com
Address: No.1, Jingba Road, High-tech Zone, Yantai City, Shandong Province
Powered by: 300.cn SEO Tags