Oil-Air Lubrication for Hot Rolling Mill Bearings
Release time:
2021-06-02
Hot rolling mills operate under high temperature, heavy load, high speed and continuous production conditions. Their work rolls, backup rolls, transmission components and related bearings must maintain stable operation throughout the rolling process.
Because the bearings are exposed to heat, cooling water, scale and mechanical loads, selecting the correct lubrication system is essential for equipment reliability.
Lubrication Challenges in Hot Rolling Mills
Hot rolling mill bearings may experience:
- High operating temperature;
- Heavy rolling loads;
- High rotational speed;
- Cooling water and steam;
- Iron oxide scale contamination;
- Strong vibration and impact;
- Limited maintenance windows.
If the lubricant supply is insufficient, friction and wear may increase. If too much lubricant is supplied, heat accumulation and lubricant waste may occur.
Water and scale entering the bearing housing may also reduce lubricant performance and accelerate bearing damage.
Why Consider Oil-Air Lubrication?
Oil-air lubrication supplies a precisely metered quantity of oil to the bearing with the assistance of compressed air. This method is suitable for applications where controlled lubricant delivery and continuous operation are important.
The system can help provide:
- Accurate oil supply to individual bearings;
- Continuous delivery of fresh lubricant;
- Reduced over-lubrication;
- Supporting cooling through compressed airflow;
- Positive pressure inside the bearing housing;
- Reduced entry of water, dust and scale;
- Lower lubricant consumption in suitable applications.
Oil-air lubrication is particularly valuable where the bearing operates at high speed or where excessive grease may generate additional heat.
Application Areas in Hot Rolling Mills
Oil-air lubrication may be considered for:
- Work roll bearings;
- Intermediate roll bearings;
- Backup roll bearings;
- Rolling stand bearings;
- High-speed transmission bearings;
- Roller table bearings;
- Other suitable rotating components.
The final selection depends on the actual equipment conditions. Not every component requires the same lubrication method.
Huashun Customized Lubrication Engineering
Huashun designs centralized oil-air lubrication systems according to the customer’s rolling mill layout and operating requirements.
The design process considers:
- Bearing type and dimensions;
- Rotational speed;
- Load and impact conditions;
- Operating temperature;
- Cooling water exposure;
- Number of lubrication points;
- Oil viscosity and cleanliness;
- Pipeline distance;
- Control and monitoring requirements.
A complete solution may include the oil-air station, pumps, distributors, pipelines, sensors, PLC control cabinet and alarm system.
Improving Rolling Mill Equipment Reliability
A well-designed oil-air lubrication system can help maintain a stable lubricant film, reduce lubrication-related wear and support more reliable bearing operation.
For hot rolling mills, lubrication should be treated as part of the overall equipment engineering process rather than as a separate maintenance task.
Huashun — Intelligent Centralized Lubrication Expert.
Latest News
Inquiry WhatsApp
Mob / Wechat : +86-13365356854
Email: info@ythuashun.com
Address: No.1, Jingba Road, High-tech Zone, Yantai City, Shandong Province,China
Powered by: 300.cn SEO Tags